CF-25SB
![CF-25SB Case Former](/Signode/media/Signode/CF-25-SB_600x350.jpg)
Maximizes Productivity
Forms and bottom seals corrugated boxes at speeds up to 15 cases per minute
Minimal Setup
Intuitive changeover feature saves time and increases efficiency
Compact Footprint
Case flow technology allows for in-line, compact footprint
Superior Performance
Patent pending design mechanically squares boxes at side belt entrance
CF-25SB Fully Automatic Narrow Box Case Former
The CF-25SB is a fully automatic, industrial grade uniform case erector designed to form and bottom seal corrugated boxes at speeds up to 15 cases per minute. With a minimum case width of 88.9 mm (3.5 in), this side belt erector was designed for the co-packer, electronics, personal care, and pharmaceutical industries.
Features and Benefits
Performance
- Patented case flow technology allows for in-line, compact footprint
- Patent pending technology mechanically squares boxes at side belt entrance
- Box maintains squareness due to common shaft driven belt speeds
- Allen Bradley Micro 820 PLC
- Eaton HMI
- Chain-driven powered hopper positively drives the cases toward the extraction point vs gravity hopper which can miss feed
- Powerful 1/3 HP high efficiency
- UL Listed 508A enclosed panel certification
- Fully guarded
- Magnetic interlocking gate restricts access to moving parts and shuts off air and electric when gates are opened
Versatility
- 150 load on the fly case capacity, accessible from either side of machine
- Simple and efficient tool-less case changeover
Durability
- 24/7 operation
- Constructed of 10 and 12 gauge steel with solid 4 post nested construction
- Linear bearings and hardened sprockets
- Sealed, maintenance free gear boxes
Optional Equipment
- Casters
- Box jam warning beacon
- Tape detection
- Low tape warning
- Leg extensions
- Low hopper warning
- Spare parts kit
- Stainless steel
- Avail in CE, NEMA 4, NEMA 12
- Leveling pads
- Air dryer
- Increase conveyor height up to 81.3 cm (32 in)
- Light stack for box jam detection
- Mirror Image controls
- 76 mm (3 in) wide PST
- Cold room package
Technical Specifications
Power | 115 volts, 60 cycle, single phase |
Air | 14 SCFM @ 85 psi |
Production Rate | 12-15 cases per minute |
Case Range | Length: 152 mm - 406 mm (6 in - 16 in) Width: 88.9 mm - 356 mm (3.5 in - 14 in) Height: 102 mm - 305 mm (4 in - 12 in) |
Machine Dimensions | Length: Minimum 191 cm (75.125 in) Width: 110 cm (43.25 in) Height: 192.5 cm (75.75 in) |
Conveyor Height | 57.8 cm (22.75 in) Standard Consult factory for other heights |
Warranty | 1 Year |
Closure Material | Pressure sensitive tape |