SP-304
![SP-304 Case Former](/Signode/media/Signode/SP-304_350x600.png)
Increases Productivity
"T"-rail pack station and flap folding assist can increase output as much as 40% over hand sealing
Minimal Setup
Quick and simple width & height adjustments
Enhanced Performance
Patented single mast design allows clear access
Simplifies Operation
Self-centering belts and lubrication-free tape cartridges for easy operation
SP-304 Semi-Automatic, Uniform Case Sealer
The SP-304 semi-automatic case sealer with packing anvil is a complete ‘end of line’ solution. It improves end of line speed and efficiency by removing the need to fold six of the eight flaps on the case. This results in outcomes that are up to 40% more effective than hand sealing. The SP-304 case sealer uses simple adjustments and no air or pneumatics are used in the machine, which makes it reliable, simple and portable.
The SP-304 case sealer is side-belt driven, and it operates by propelling cartons through a folding section that folds all major flaps and one upper flap. Repetitive motion from hand sealing is reduced, and productivity is increased with this innovative design.
Features and Benefits
Performance
- Plug-in operation
- Minimal operator training required
- Self-centering belts
- Alleviates twisting motion known to cause carpal tunnel syndrome
- Patented single mast design allows clear access
- Knife guard system of the CaseLocker ST™ tape cartridge allows the blade to be exposed only when the rollers have been depressed
Versatility
- Tapes boxes from 114 mm (4-1/2 in) to 610 mm (24 in) in height
Durability
- Sealed drive system
- CaseLocker ST™ tape cartridge requires no lubrication
Optional equipment
- Exit roller transfer table
- Casters
- Recommended spare parts kit
- Spare Caselocker 60™ tape cartridge
- Jet printer adapter
- Mirror image (left to right case flow)
- Additional sized "T" rail (slide on)
- Hold-down sled
- Additional length "T" rail
- Extended box guides (12")
- Permanently change conveyor height
- 34" high case capability (type II)
- 3 phase motor
- NEMA 4 or NEMA 12 electrical package
Technical Specifications
Power | 110 volts, 60 cycle, single phase |
Operating Speed | 21.9 m/min (72 feet) per minute)* |
Case Range | Length: 152.4 - 609.6 mm (6 - 24 in) Width: 114.3 - 508 mm (4.5 - 20 in) Height: 114.3 - 609.6 mm (4.5 - 24 in)** |
Machine Dimensions | 2019.3 mm (79-1/2 in) long 1092.2 mm (43 in) wide 1720.8 mm (67-3/4 in) high |
Weight | 136 kg. (300 lbs), uncrated |
Conveyor Height | 615.9 - 742.9 mm (24-1/4 - 29-1/4 in) Standard Consult factory for other heights |
Warranty | 3-year - Tape cartridges 2-year - Complete drive system, motor/gear reducer 1-year - All other parts except for wear and moving parts |
Closure Material | Pressure sensitive tape |
* Production rate depends on box size & operator dexterity
** Certain length x width x height combinations may not process due to unstable conveying conditions