Bates Cargo Pak Flex Plastic Airbags
Quality Material
Made from three layers of PE quality film
Stabilise Cargo
The airbag assumes the precise shape of the gap and supports and stabilises the cargo effectively during transport
Time Saving
Inflate in 11 seconds
Easy Inflation
Equipped with a patented valve, can be turned 360 degrees making it possible to inflate from all angles
Flex Plastic Airbags
Flex Plastic consists of PE inner liner and PP outer liner quality film, which is coextruded, providing the ultimate airtight seal and strength. Used to secure cargo, which is to be transported by container or road and is at risk of being exposed to loads up to 9 tons. The empty airbag should be placed in the gaps between the cargo and inflated using compressed air. The airbag can be deflated easily, and removed immediately from the cargo.
Features and Benefits
- High Wet Strength
The combination of materials also provide very high wet strength. - For all Climates
Suitable for use in all climatic conditions and can withstand up to 90% (RH) humidity at 60 degrees Celsius. - High Strength
The maximum load depends on the size of the airbag and the gap between the cargo see the table below.
Technical Specifications
| Weight and Dimensions | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size in cm | 60 x 110 | 85 x 75 | 85 x 120 | 85 x 180 | 100 x 180 | 100 x 200 | 115 x 185 | 115 x 210 |
| Pcs. per carton | 90 | 80 | 50 | 45 | 40 | 35 | 45 | 40 |
| Pcs. per pallet | 720 | 640 | 400 | 360 | 320 | 280 | 360 | 320 |
| Gross Weight/cart. | 25.6 | 23.2 | 21.6 | 28.1 | 29.2 | 28.3 | 38.3 | 38.6 |
| Gross Weight/pall. | 216 | 189 | 185 | 237 | 246 | 239 | 327 | 329 |
| Inflation Times | |
|---|---|
| 60 x 110 | 11 seconds |
| 100 x 220 | 46 seconds |
In the table above filling time is based on a 3/4” hose and a pressure of 4 bar (56 psi).
| Maximum Load | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Size in cm | 60 x 110 | 85 x 75 | 85 x 120 | 85 x 180 | 100 x 180 | 100 x 200 | 115 x 185 | 115 x 210 | |
| Load in tons in a gap of: | 10 cm | 1.9 | 1.8 | 3.4 | 5.1 | 6.6 | 7.2 | 8.0 | 9.2 |
| 15 cm | 1.2 | 1.1 | 2.2 | 3.4 | 4.5 | 5.0 | 5.4 | 6.4 | |
| 20 cm | 0.7 | 0.7 | 1.4 | 2.3 | 3.1 | 3.3 | 3.7 | 4.4 | |
| 25 cm | 0.4 | 0.4 | 0.9 | 1.6 | 2.2 | 2.5 | 2.9 | 3.4 | |
| 30 cm | 0.3 | 0.7 | 1.2 | 1.7 | 2.0 | 2.3 | 2.7 | ||
| 35 cm | 0.2 | 0.7 | 0.9 | 1.3 | 1.5 | 1.8 | 2.2 | ||
| 40 cm | 1.0 | 1.2 | 1.5 | 1.8 | |||||
| 45 cm | 0.7 | 0.9 | 1.1 | 1.4 | |||||
| Max. gap in cm | 25 | 37 | 37 | 37 | 45 | 45 | 52 | 52 | |